ABSTRACT
Objective:Three-dimensional simulation modeling technology was used to conduct three-dimensional reconstruction, classification and measurement for the anatomic structures of colorectal canal, tumor and key blood vessels in patients with rectal cancer before operation. And the accuracy of the data and information obtained for the prediction of anastomotic tension, important types of vascular variant, positioning of anatomical landmarks, etc. in laparoscopic-assisted radical resection of rectal cancer, and the guiding effect of operation was evaluated.Methods:The clinical data of 50 patients with laparoscopic-assisted radical resection of rectal cancer treated in the General Surgery Department, Beijing Ditan Hospital Capital Medical University from January 2019 to February 2021 were analyzed retrospectively, including 31 males and 19 females, aged from 42 to 83 years old, with an average age of (62.72 ±15.21) years. The patients were divided into two groups according to whether the patients underwent three-dimensional simulation reconstruction before operation. The patients who underwent abdomen pelvic enhancement CT and further three-dimensional reconstruction before surgery were taken as reconstruction group ( n=24), and the patients who were only routinely performed abdomen pelvic enhancement CT before operation were taken as control group ( n=26). For the patients in the reconstruction group, the CT images were modeled by Mimics software before operation, and the key data such as the length of colorectal and tumor, the correlation length of rigid structure of pelvic wall, the length of inferior mesenteric artery (IMA) from the bifurcation point of left and right arteria iliaca communis, the type and proportion of IMA variation, the length of left colonic artery (LCA) from the beginning of IMA and the distance between LCA and IMV were measured, and the consistency correlation coefficient (CCC) was analyzed with the actual data obtained during operation. And then the accuracy of three-dimensional simulation modeling technology for surgical guidance was evaluated. MedCalc 19.0 software was used for statistical analysis. Results:In the reconstruction group, regarding the data of each dimension of the model (intestinal tract, pelvic cavity, blood vessels) and the corresponding structural measurements during the operation, the consistent correlation coefficient (CCC) evaluation was more than 0.9. One case was predicted to have free splenic flexure of colon and one case actually had free splenic flexure of colon. The prediction accuracy was 100%. The IMA variants in the reconstruction group were divided into 4 types, all of which were verified by operation. Compared with the control group, the operation time ( P=0.011) and the location time (IMA, P=0.043; LCA, P=0.007; IMV, P=0.034) of each vessel in the reconstruction group were shorter, and the amount of intraoperative blood loss was less ( P=0.017). Conclusion:The application of three-dimensional simulation modeling technology before operation is helpful for the operator to accurately predict the intraoperative anastomotic tension, the type of IMA variation and the related diameter length, based on which the accurate operation plan can be made to guide the operation.
ABSTRACT
Hepatic alveolar echinococcosis (HAE) is a parasitic disease caused by Echinococcus multilocularis infection and has wide distribution and great harm in China. At present, ultrasound, CT, and MRI are the main radiological examination methods for HAE, with certain limitations in preoperative diagnosis and evaluation. This article introduces the guiding effect of three-dimensional visualization technique and its derivative technologies in the accurate diagnosis and preoperative evaluation of HAE, so as to provide help for the clinical diagnosis and treatment of HAE in the future.
ABSTRACT
OBJECTIVE@#To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method.@*METHODS@#The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research.@*RESULTS@#The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm.@*CONCLUSION@#The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Subject(s)
Humans , Imaging, Three-Dimensional/methods , Mandible/diagnostic imaging , Software , Algorithms , Anatomic Landmarks/anatomy & histologyABSTRACT
OBJECTIVE@#To investigate the difference in sensitivity between X-ray and three-dimensional reconstruction of computed tomography (3D-CT) for the diagnosis of distal fibular avulsion fracture, and the radiographic presentation of the ossicle.@*METHODS@#From January to October 2018, 92 patients with distal fibular avulsion fracture were visited for surgical treatment in Department of Sports Medicine, Peking University Third Hospital, and 60 cases were finally enrolled according to the inclusion and exclusion criteria. Intraoperative detection was regarded as the gold standard, and the diagnostic sensitivity of preoperative ankle X-ray and 3D-CT for the distal fibular avulsion fractures was statistically determined. The ossicle maximum diameter as well as the degree of its displacement were also measured. On 3D-CT, the distance from the ossicle center point to the anterior fibular tuberosity (a), the distance to the fibular tip (b), and the a/b value was used to present the ossicle displacement.@*RESULTS@#Among the 60 patients, 36 and the 52 patients were correctly detected by X-ray and 3D-CT, respectively, and the sensitivities was 60.0% and 86.7%, respectively (P=0.004). The mean diameter of the ossicle on X-ray and 3D-CT was (9.2±3.9) mm and (10.5±3.2) mm, respectively. The mean distance from the ossicle center to the anterior fibular tuberosity (a) was (17.5±3.6) mm and the mean distance to the fibular tip (b) was (17.4±4.8) mm, with mean a/b values of 1.1±0.7. The intraclass correlation coefficients (ICC) for each measurement ranged from 0.891-0.998 with a high degree of consistency.@*CONCLUSION@#Compared with X-ray, 3D-CT has higher sensitivity in diagnosing distal fibular avulsion fractures, can help clinicians evaluate ossicle's location and choose surgical methods, and is recommended to be performed in patients with suspected distal fibula avulsion fractures in clinical practice.
Subject(s)
Humans , Fibula/surgery , Fractures, Avulsion , Ankle , X-Rays , Imaging, Three-Dimensional , Ankle Fractures , Ankle Joint , Tomography, X-Ray ComputedABSTRACT
Objective:To evaluate the application of three-dimensional (3D) imaging device to colonoscopy.Methods:A total of 60 patients who underwent painless colonoscopy in Beijing Friendship Hospital, Capital Medical University from November to December, 2019 were enrolled and divided into 2 groups according to random code. Each patient underwent colonoscopy twice, while 2D colonoscopy was used for cecal intubation. Thirty patients were assigned to the experimental group (primary withdrawal used 3D colonoscopy, and secondary withdrawal used 2D colonoscopy), and 30 others to the control group (primary withdrawal used 2D colonoscopy, and secondary withdrawal used 3D colonoscopy). The detection of polyps, the withdrawal time, operating experience, image quality and complication were evaluated in the two groups.Results:The polyp detection rate at the first colonoscopy in the experimental group was 77.3% (17/22), which was higher than 43.5% (10/23) in the control group ( χ2=5.351, P=0.021). Ten operators in the experimental group had dizziness, while the operators in the control group had no dizziness ( P=0.001). There were no significant differences between the two groups in the polyp diameter [0.50 (0.70) cm VS 0.30 (0.20) cm, U=57.000, P=0.170], withdrawal time (4.6±1.5 min VS 5.2±1.9 min, t=-1.189, P=0.239) or image quality (27 cases with 3 points in the identification of lesion nature, and 28 cases with 3 points in the identification of duct both in the two groups, P=1.000) at the first colonoscopy. No complication occurred in either group. Conclusion:Application of 3D imaging device is feasible for colonoscopic polyp detection, and it can be used in clinical practice.
ABSTRACT
Objective:To investigate the characteristics of anorectal dynamics in elderly patients with functional defecation disorders(FDD), and to provide a basis for their diagnosis, treatment and prevention.Methods:In this retrospective study, 226 patients with FDD receiving 3D high-resolution anorectal manometry were divided into an elderly group(93 cases)and a non-elderly group(133 cases). Results from anorectal manometry parameters were compared and analysis of patterns of anorectal pressure changes in elderly participants based on sex, the Bristol stool classification and clinical symptoms was conducted.Results:The resting anal pressure, rectal pressure and anal relaxation rate were lower( t=-3.407, -2.051, Z=2.548, P=0.001, 0.040, 0.011)and the volume of first sensation was higher( t=1.998, P=0.047)in the elderly group than in the non-elderly group.The maximum anal squeezing pressure, residual anal pressure and maximum tolerated volume were higher( t=4.589, 4.730, 2.025, all P<0.05), whereas the anal relaxation rate and anorectal pressure gradient were lower in elderly men than in elderly women( Z=4.059, t=-3.714, P<0.001 for both). Regarding the types of FDD, both the elderly group and the non-elderly group were dominated with type Ⅱ defecation disorder, with more men than women having type Ⅱ defecation disorder in the elderly group( χ2=10.343, P=0.001). In cases of paradoxical sphincter contraction during simulated defecation, the incidence in the elderly group was 80.65%(75/93), which was higher than 68.42%(91/133)in the non-elderly group( χ2=4.194, P=0.041). The volume of first sensation, volume of first defecation sensation, and maximum tolerated volume of patients in the elderly group without the urge to defecate were(59.86±23.84)ml, (96.76±34.61)ml, and(144.32±30.57)ml, respectively, higher than those of patients with the urge to defecate(46.79±17.20)ml, (75.26±28.75)ml, and(120.00±40.28)ml( t=-2.241, -2.493, -2.891, P=0.027, 0.014, 0.005). The rectal pressure(26.52±16.08)mmHg of patients with defecation dyssynergia was lower than that of patients without defecation dyssynergia(39.91±8.82)mmHg(1 mmHg=0.133 kPa)( t=-3.128, P=0.002), while the resting anal pressure of patients with defecation dyssynergia(90.60±28.44)mmHg was higher than that of patients without defecation dyssynergia(73.65±27.10)mmHg( t=-2.201, P=0.030). The resting anal pressure and maximum anal squeezing pressure in patients with anal blockage sensation[(87.11±24.64)mmHg, (149.28±48.29)mmHg]were higher than those in patients without anal blockage sensation[(72.43±20.02)mmHg, (121.76±26.35)mmHg]( t=2.954、3.066, P=0.004、0.003). There was no significant difference in values from parameters of anorectal dynamics between patients with different Bristol stool types, with and without incomplete defecation or with different degrees of abdominal distension(all P>0.05). Conclusions:Anorectal dynamics in patients with FDD are characterized by paradoxical anal sphincter movements, but older patients with FDD are mainly characterized by inadequate rectal propulsion, pelvic floor muscle dysfunction and reduced rectal sensitivity.
ABSTRACT
Objective:To investigate the clinical efficacy of preoperative three-dimensional (3D) reconstruction planning in total hip arthroplasty for development dysplasia of the hip secondary to osteoarthritis.Methods:A total of 80 patients with osteoarthritis secondary to Crowe I-III developmental dysplasia of the hip who underwent primary unilateral total hip arthroplasty from October 2019 to March 2021 were retrospectively analyzed, including 18 males and 62 females and the mean age was 55.7±10.4 years (range 41-72 years). Forty patients in the 3D group, the prosthesis type and installation angle were planed on the 3D reconstruction software based on the full-length CT scan data of the lower limbs, and the length difference of the lower limbs and hip offset were calculated. Forty patients in the control group underwent preoperative planning using conventional film measurement, and lower limb length was judged based on the preoperative measurement data and intraoperative comparison of both lower limbs. The difference of postoperative leg length, hip offset, hip function score, operating time, intraoperative blood loss, and incidence of complications were compared between the two groups.Results:All 80 patients completed the surgery successfully and the follow-up time was up to 3 months after operation. The 3D group was better than the control group in operation time (70.9±7.7 min vs. 81.6±13.3 min, t=-4.91, P<0.001), the difference of postoperative lower limb length (2.78±1.31 cm vs. 5.35±2.15 cm, t=-5.74, P<0.001), and hip function score at 1 week after operation (75.67±3.35 vs. 67.35±4.21, t=12.33, P=0.002), with statistically significant differences. In the 3D group, 95% of acetabular prosthesis and 90% of femoral stem components were consistent with the planned model, while the rate were only 75% and 68% in the control group, and the difference was statistically significant (χ 2=7.51, P=0.023; χ 2=14.92, P=0.005). There were no intraoperative complications such as vascular and nerve injury, and no postoperative complications such as dislocation or periprosthetic infection in all 80 patients. Conclusion:3D preoperative planning assisted total hip arthroplasty in the treatment of Crowe I-III developmental dysplasia of the hip secondary to osteoarthritis can improve the accuracy of the operation, and has a good clinical effect on restoring the leg length and hip offset.
ABSTRACT
Objective:To investigate the effect of open reduction and internal fixation assisted by computer virtual surgery in the treatment of complex proximal humeral fracture.Methods:A retrospective case series study was performed on clinical data of 36 patients with complex proximal humeral fracture admitted to Dongfang Hospital Affiliated to Tongji University from January 2018 to June 2020. There were 13 males and 23 females, aged 22-86 years [(56.4±4.8)years]. They were all closed fractures. According to Neer classification, there were 20 patients with three-part fractures and 16 with four-part fractures. Precise pre-surgical designs made by using the digital orthopedic surgery planning system of the E-3D were applied to assist the implementation of precise fracture reduction and internal fixation with the locking plate. The fracture healing was observed. The effect of the real surgery assisted by the virtual surgical designs was assessed by comparing the humeral neck shaft angle and humeral head height measured at the virtual surgery and at day 1 after the real surgery. The humeral neck shaft angle, humeral head height, shoulder range of motion (abduction, external rotation and forward flexion), Constant shoulder function score and visual analogue score (VAS) were recorded at 1 day, 3 months and 12 months after the real surgery. The stability of the medial column was assessed at 1 day after the real surgery. The complications were recorded.Results:All patients were followed up for 12-38 months [(18.5±1.8)months]. The fracture showed bony union in all patients with the union time of 6.6-17.2 weeks [(10.2±1.0)weeks]. The humeral neck shaft angle and humeral head height showed no significant differences measured at the virtual surgery and at 1 day after the real surgery, and were also not significant different at 1 day, 3 months and 12 months after the real surgery (all P>0.05). At 3 months and 12 months after the real surgery, the shoulder abduction [(119.4±11.8)°, (155.3±13.7)°], external rotation [(37.6±6.3)°, (46.8±7.4)°], forward flexion [ (94.8±10.2)°, (126.9±1.6)°] and Constant function score [(66.8±8.4)points, (82.4±9.6)points] were all higher than those at 1 day after the real surgery [(53.8±4.5)°, (21.6±3.3)°, (44.6±7.8)°, (34.3±6.1)points], while the VAS [(4.1±0.5)points, (1.2±0.2)points] was lower than that at 1 day after the real surgery [(8.3±1.4)points] (all P<0.05). The medial column was stable in 34 patients and unstable in 2 at 1 day after the real surgery. Complications included screw cutting out in the articular surface in 1 patient and humeral head necrosis in 1. Conclusion:Treatment of complex proximal humeral fractures with open reduction and internal fixation assisted by computer virtual surgery is conducive to maintaining reduction effect, promoting shoulder joint function, relieving pain and reducing complications.
ABSTRACT
Objective:To investigate the difference in left ventricular dysfunction between type 2 diabetes mellitus (T2DM) patients with hyperlipidemia and those without hyperlipidemia, and analyze the application value of three-dimensional speckle tracking technology.Methods:The clinical data of 70 patients with T2DM admitted to Heji Hospital Affiliated to Changzhi Medical College from January 2020 to June 2021 were retrospectively analyzed. Among these patients, 35 patients had hyperlipidemia and 35 patients had no hyperlipidemia. At the same time, 40 healthy subjects who concurrently underwent health checkups in the same hospital were included as healthy controls. All subjects underwent routine cardiac ultrasound and 3D-STE examinations. General clinical information and left ventricular function-related parameters, including global longitudinal strain, global circumferential strain, global area strain, and global radial strain were compared between healthy controls and T2DM patients with hyperlipidemia and those without hyperlipidemia.Results:The proportion of left ventricular remodeling increased in T2DM patients without hyperlipidemia, and the proportion of left ventricular hypertrophy was the highest in T2DM patients with hyperlipidemia. Global longitudinal strain and global circumferential strain in T2DM patients without hyperlipidemia were (-16.97 ± 2.59)% and (-17.41 ± 2.50)%, respectively, which were significantly higher than (-18.86 ± 2.46)% and (-18.71 ± 2.92)% in healthy controls ( t = 0.95, 0.57, both P < 0.05). Global longitudinal strain, global circumferential strain, and global area strain in T2DM patients with hyperlipidemia were (-14.98 ± 3.15)%, (-15.80 ± 3.16)%, (-27.17 ± 4.54)%, respectively, which were significantly higher than (-18.86 ± 2.46)%, (-18.71 ± 2.92)%, (-30.62 ± 4.02)% in healthy controls ( t = 0.46, 1.37, 0.98, all P < 0.05) and (-16.97 ± 2.59)%, (-17.41 ± 2.50)%, (-30.06 ± 3.59)% in T2DM patients without hyperlipidemia ( t = 0.37, 1.02, 0.77, all P < 0.05). Global radial strain in T2DM patients with hyperlipidemia was significantly higher than [(51.49 ± 8.94)%, t = 1.35, P < 0.05] in healthy controls and [(47.71± 8.46)%, t = 0.98, P < 0.05] in T2DM patients without hyperlipidemia. In patients with T2DM, fasting blood glucose and hyperlipidemia were independently correlated with all strain-related parameters. Conclusion:Hyperlipidemia can aggravate left ventricular remodeling and dysfunction in patients with T2DM and 3D-STE is one of the examination methods for subclinical left ventricular remodeling and dysfunction in T2DM patients with or without hyperlipidemia.
ABSTRACT
Objective:To investigate the diagnostic value of thin-layer three-dimensional reconstruction technology combined with personalized scanning for benign and malignant solid solitary pulmonary nodules.Methods:The clinical data of 140 patients with solid solitary pulmonary nodules admitted to Jiangshan People's Hospital form January 2020 to July 2021 were retrospectively analyzed. These patients consisted of 40 patients with benign solid solitary pulmonary nodules (benign group) and 100 patients with malignant solid solitary pulmonary nodules (malignant group). All patients underwent thin-layer three-dimensional reconstruction combined with personalized scanning. The pulmonary nodule signs achieved by thin-layer three-dimensional reconstruction combined with personalized scanning and the diagnostic performance of the combined technology were compared between benign and malignant groups.Results:The proportions of patients with lung cavity sign, lobular sign, vascular convergence sign, vacuole sign, emphysema distribution sign, split pleura sign, and distal perforating vascular sign in the malignant group were 11.0%, 81.0%, 77.0%, 49.0%, 6.0%, 10.0% and 31.0%, respectively, and they were 42.5%, 62.5%, 55.0%, 27.5%, 20.0%, 32.5%, and 5.0%, respectively in the benign group ( χ2 = 15.80, 5.00, 5.66, 4.55, 4.76, 8.96, 9.33, all P < 0.05). The most sensitive sign was lobular sign, which had the highest efficiency, up to 82.0%, in differentiating benign and malignant pulmonary nodules. Conclusion:Lung cavity sign, lobular sign, vascular convergence sign, vacuole sign, emphysema distribution sign, split pleura sign, and distal perforating vascular sign differ greatly between patients with benign and malignant solid solitary pulmonary nodules. Lobular sign has the highest sensitivity in differentiating benign and malignant solid solitary pulmonary nodules. Thin-layer three-dimensional reconstruction combined with personalized scanning has a diagnostic value for benign and malignant solid solitary pulmonary nodules.
ABSTRACT
Aim: To assess the reliability and validity of morphometric features on 3D digital models produced by scanning maxillary dental casts of Malaysian Malay subjects. Methods: Dental casts of 20 subjects were scanned using a 3D laser scanner (Next Engine Inc., Santa Monica, California, USA). The palatal rugae morphometric features were assessed on the resulting 3D models using 3-Matic Research 9.0 software (Materialise NV, Heverlee, Belgium). The assessments were repeated by the first and second authors to assess the intra- and interexaminer reliability, respectively. Rugae morphometric features were also evaluated on the conventional plaster models to assess the validity of the 3D method. Results: Kappa values of the validity ranged from 0.807 to 0.922 for rugae shape, size category and direction. The intraclass correlation coefficient (ICC) for rugae number validity was 0.979. For intra-examiner reliability, kappa values ranged from 0.716-1.000 for rugae shape, size category and direction. The ICC for rugae number intra-examiner reliability was 0.949. Kappa values of interexaminer reliability for rugae shape, size category and direction were 0.723-885, while the ICC of rugae number was 0.896. Conclusion: Palatal rugae analyses on 3D digital models scanned by the 3D Next Engine laser scanner using 3-Matic Research 9.0 software are valid and reliable
Subject(s)
Palate , Forensic Anthropology , Imaging, Three-Dimensional , Forensic DentistryABSTRACT
Aim: To evaluate the accuracy and the validity of orthodontic diagnostic measurements, as well as virtual tooth transformations using a generic open access 3D software compared to OrthoAnalyzer (3Shape) software; which was previously tested and proven for accuracy. Methods: 40 maxillary and mandibular single arch study models were duplicated and scanned using 3Shape laser scanner. The files were imported into the generic and OrthoAnalyzer software programs; where linear measurements were taken twice to investigate the accuracy of the program. To test the accuracy of the program format, they were printed, rescanned and imported into OrthAnalyzer. Finally, to investigate the accuracy of editing capabilities, linear and angular transformation procedures were performed, superimposed and printed to be rescanned and imported to OrthoAnalyzer for comparison. Results: There was no statistically significant difference between the two groups using the two software programs regarding the accuracy of the linear measurements (p>0.05). There was no statistically significant difference between the different formats among all the measurements, (p>0.05). The editing capabilities also showed no statistically significant difference (p>0.05). Conclusion: The generic 3D software (Meshmixer) was valid and accurate in cast measurements and linear and angular editing procedures. It can be used for orthodontic diagnosis and treatment planning without added costs
Subject(s)
Software , Casts, Surgical , Imaging, Three-Dimensional , Models, DentalABSTRACT
Abstract This study evaluated the Reciproc R25 and Pro-R 25 instruments in unused condition, after one and a second use in endodontic retreatment employing a noncontact 3D light interferometer profiler, scanning electron microscopy (SEM) and cyclic fatigue tests. Twenty single-root teeth were instrumented with Reciproc R25 and filled with gutta-percha and sealer. A 3D profiler with a 20x objective using the Mx™ software was used to evaluate the cutting blade surfaces of Reciproc R25 and Pro-R 25 (n=5 per group) in unused condition, after the first and second uses in retreatment procedures. After retreatment, SEM was used to evaluate the topographic features of the used instruments. Cyclic fatigue tests were performed to compare new to used instruments. One-way ANOVA followed by Tukey test was used to compare the tested instruments before and after the first and second uses. Student t-test was used to compare the different instruments and for cyclic fatigue evaluation. No significant differences were observed in the cutting blade surfaces of Reciproc and Pro-R before and after one and two uses (p>0.05). Reciproc without use showed higher Sa and Sq when compared to Pro-R without use (p<0.05). No differences were observed between Reciproc and Pro-R after one and two uses (p>0.05). New and unused Reciproc showed longer time to fracture than Pro-R instruments (p<0.05), and only Pro-R showed differences between new and used instruments (p<0.05). Retreatment procedures with Reciproc and Pro-R did not change the surface topography of instruments. Reciproc had greater resistance to cyclic fatigue compared with Pro-R.
Resumo Este estudo avaliou os instrumentos Reciproc R25 e Pro-R 25 sem uso, após um primeiro e um segundo uso em retratamento endodôntico com perfilômetro 3D por interferometria de luz sem contato, microscópio eletrônico de varredura (MEV) e testes de fadiga cíclica. Vinte dentes unirradiculares foram instrumentados com Reciproc R25 e obturados com guta-percha e cimento endodôntico. Um perfilômetro 3D com uma objetiva 20x usando o software Mx ™ foi usado para avaliar as superfícies da lâmina de corte do Reciproc e Pro-R (n = 5 por grupo) na condição sem uso, após o primeiro e após um segundo uso em procedimentos de retratamento. Após retratamento, o MEV foi usado para avaliar as características topográficas dos instrumentos utilizados. Testes de fadiga cíclica foram realizados para comparar instrumentos novos com instrumentos usados. O teste One-way ANOVA seguido pelo teste de Tukey foi usado para comparar os instrumentos testados nos diferentes estágios. Para comparar os diferentes instrumentos e para avaliação de fadiga cílcica, foi utilizado o Student t-test. Não foram observadas diferenças estatisticamente significantes nas superfícies das lâminas de corte dos instrumentos Reciproc e Pro-R antes e após um e dois usos (p> 0,05). O Reciproc na condição sem uso apresentou maior Sa e Sq quando comparado ao Pro-R (p <0,05). Não foram observadas diferenças entre Reciproc e Pro-R após um e dois usos (p> 0,05). O Reciproc sem uso apresentou maior tempo de fratura do que os instrumentos Pro-R (p<0,05), e apenas o Pro-R apresentou diferenças entre instrumentos novos e usados (p<0,05). Os procedimentos de retratamento com Reciproc e Pro-R não alteraram a topografia da superfície dos instrumentos. Reciproc apresentou maior resistência à fadiga cíclica em comparação com o Pro-R.
ABSTRACT
A incorporação do chamado fluxo digital já é uma realidade na odontologia clínica, e suas vantagens podem ser incorporadas à Odontologia Forense. Particularmente, os escâneres, ou scanners intraorais (SIOs) geram modelos tridimensionais digitais em forma de arquivo que podem ser armazenados, analisados e comparados utilizando aplicativos próprios. Trata-se de técnica que obtém registros com agilidade e precisão, onde os dados podem ser obtidos, se necessário, no próprio local do encontro, como por exemplo, nos acidentes coletivos. O objetivo deste estudo é revisar a literatura sobre as aplicações mais recentes dos SIOs e dos arquivos por eles gerados na Odontologia Forense. Onze trabalhos foram selecionados para revisão. Os estudos mostram que as técnicas existentes se beneficiam do uso dos SIOs e dos modelos digitais, e que medidas exatas e precisas podem ser feitas digitalmente. Algoritmos de comparação e inteligências artificiais podem ser de grande contribuição para o processo de identificação, diminuindo a quantidade de suspeitos a serem comparados com uma determinada amostra e identificando restaurações metálicas. A técnica digital permite a diferenciação de gêmeos monozigóticos por análise das rugosidades palatinas. A identificação humana baseada apenas na análise física ou digital de marcas de mordida não é recomendada, pois é sujeita a viés do examinador
The digital workflow is already ubiquitous in the clinical dental practice, and its advantages can be incorporated to the forensic odontology. Intraoral scanners generate digital casts that can be stored, analyzed and compared using the proper software. It's a technique that swiftly and precisely registers the object of interest, and can be used on-site, if needed, in mass disasters, for example. The goal of this article is to review the most recent applications of the intraoral scanners and the digital files generated by them in the forensic odontology practice. Eleven articles were selected for revision. The studies demonstrate that the existing identification techniques can benefit from the use of intraoral scanners and digital casts, and measures can be taken digitally with precision and accuracy. Automated comparison algorithms and artificial intelligence models can be of great contribution to the identification process, decreasing the number of suspects that could match a sample and identifying metallic restorations. Digital analysis of palatal rugae was used successfully to identify monozygotic twins. Human identification relying solely on bitemark analysis, even with digital techniques, is not recommended, due to examiner bias
ABSTRACT
Objective:To study the morphologic features of the fusion site of proximal tibial epiphysis in normal adults and analyze its potential clinical value based on Mimics three-dimensional (3D) reconstruction.Methods:CT images of knee joint of 68 patients without obvious abnormalities of lower limbs were retrospectively analyzed in electronic database of our hospital from June 2020 to June 2021, including 41 males and 27 females. The mean age of the patients was 38.7±8.4 years (range, 25-55 years), and the mean body mass index (BMI) was 25.3±4.0 kg/m 2 (range, 18.75-41.8 kg/m 2). Mimics 3D reconstruction technique was used to reconstruct the 3D model of the proximal tibia and epiphyseal fusion site. The relationship between the surface area of epiphyseal fusion site and age and BMI was studied, and the changes of cortical thickness and density at epiphyseal fusion site were also explored. Results:The fusion site of adult epiphyseal reconstructed by Mimics 3D reconstruction is a complex wavy surface structure in 3D space. The surface area of the epiphyseal fusion site was 2,994.7±645.3 mm 2 (range, 1,704.0-4,650.0 mm 2) obtained by 3-Matic Research 12.0. The fusing area of male epiphysis was 3 269.3±533.9 mm 2 than that of female 2,577.6±578.7 mm 2, the difference was statistically significant ( t=5.06, P<0.001). However, there was no significant correlation between the epiphyseal fusion site surface area and age ( R2=0.02, P=0.268) and BMI ( R2=0.04, P=0.125). Mimics software was used to obtain the CT values of bone cortex at the epiphysis line and the distal end of the epiphysis line at 10 mm and 20 mm levels as 451.059±74.953 Hu, 1,018.412±125.732 Hu and 1,414.162±107.848 Hu, respectively. The thickness of bone cortex was 1.814±0.090 mm, 2.511±0.089 mm and 3.189±0.185 mm at 10 mm and 20 mm layers of epiphysis line and distal epiphysis line, respectively. Conclusion:In this study, Mimics 3D reconstruction technique was used to visualize the fusion site of the proximal tibial epiphysis in normal adults. The epiphyseal fusion site of adult is a undulating plate-like structure, and the cortical bone density of epiphyseal fusion site is low and thin, theoretically, it is easy to fracture under indirect violence.
ABSTRACT
Objective:To explore the application of 3D printing mirror models and segmentation models in preoperative planning for patellar fractures.Methods:Retrospectively analyzed were the data of 46 patellar fractures which had been treated at Department of Orthopedics, Liyang City People's Hospital from January 2016 to August 2020 using 3D printing mirror models and segmentation models in preoperative planning. There were 26 males and 20 females, aged from 19 to 79 years (average, 51.5 years). All the fractures belonged to AO type C. According to the design requirements of a solid model, the patients with DICOM CT data of bilateral lower extremities were assigned into the mirror model group (24 cases) while those with DICOM CT data of only a unilateral lower extremity into the segmentation model group (22 cases). In the mirror model group, CT scans of bilateral knee joints and the proximal tibia exceeding 15 cm were required, while in the segmentation model group, CT scans of only the affected knee joint were required. The original DICOM data were extracted and imported into software Mimics 19.0. In the mirror model group, after the "three-level long-short axis control" method was used to judge the symmetry, the original fracture model and the mirror model were created and printed respectively. During the operation, the fracture line drawn by the mirror model was used to find the fracture fragments with a similar shape which were to be assembled and fixated. The fracture fragments in the segmentation model group were divided into independent entities, converted into STL files and printed separately before the bone fragments were assembled and fixated in sequence. X-ray films were taken after operation. Recorded were the simulated operation time, visual analog scale (VAS) of the knee joint at one month after operation, and B?stman scores at one and 6 months after operation.Results:All patients were followed up for 6 to 24 months (mean, 13.6 months). In preoperative planning, only the mirror model was suitable for patients with comminuted fracture with compression and impaction, both models were suitable for fractures without impaction, compression or impaction, and the segmentation model was suitable for patients with bilateral fractures at the same site, poliomyelitis, one limb missing, and previous fracture. In the mirror model group in which the patients were controlled bilaterally using the "three-level long-short axis control" method, there was no significant difference among the 6 sets of data at 3 levels on both sides ( P>0.05). For the segmentation model group and the mirror model group, the time for preoperative simulated operation averaged 11.2 min and 9.2 min respectively, the VAS score at one month after operation was both lower than 3 points, and the B?stman scores at one and 6 months after operation were both larger than 20 points. Conclusions:The mirror image model of the unaffected patella can be used as the fracture recovery model for the affected side, but the symmetry needs to be verified in advance in case of severe degeneration. Both the 3D printed mirror model and the 3D segmentation model are suitable for preoperative planning for patellar fractures as they are complementary. Patients in both groups can obtain good joint function after treatment.
ABSTRACT
The judgment of left ventricular systolic dysfunction is of great significance for the diagnosis of heart disease, risk evaluation, and follow-ups of patients with heart disease. Evaluation of left ventricular systolic function is the most commonly used index in echocardiography. At present, the echocardiographic measurement of left ventricular function has changed from linear measurement and two-dimensional echocardiography to local and global strain analysis and three-dimensional echocardiography. Even if examination method is very superior and automatic, evaluating left ventricular systolic function is extremely challenging. This paper reviews the most widely used echocardiography, evaluates left ventricular systolic function in adults and children, and discusses its advantages, disadvantages and the research progress.
ABSTRACT
Objective To investigate the significance of the three-dimensional visualization ablation planning system in radiofrequency ablation for liver cancer. Methods A total of 71 patients who received radiofrequency ablation for hepatocellular carcinoma in Beijing Ditan Hospital, Capital Medical University from July 2017 to December 2020 were enrolled as subjects. The 34 patients in the three-dimensional group used the three-dimensional visualization ablation planning system for radiofrequency protocol planning before surgery and the 37 patients in the two-dimensional group used the two-dimensional image for radiofrequency protocol planning before surgery. The two groups were compared in terms of the indices such as the first-attempt success rate of puncture, complete tumor ablation rate, and tumor-free survival. The Fisher's exact test, the chi-square test of continuous correction, or the Pearson chi-square test was used for comparison of categorical data between two groups; the t -test was used for comparison of normally distributed continuous data between groups, and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data between groups. The Kaplan-Meier method was used to plot survival curves, and the Log-rank (Mantel-Cox) test was used for comparison of tumor recurrence and survival; the Cox proportional-hazards regression model analysis was used to investigate the influencing factors for tumor-free survival. Results Compared with the two-dimensional group, the three-dimensional group had a significantly higher first-attempt success rate of puncture (94.12% vs 75.68%, Pearson χ 2 =4.183, P =0.041) and a significantly shorter median time of puncture (5 minutes vs 7 minutes, Z =-2.407, P =0.013). There was no significant difference in complete ablation rate between the three-dimensional group and the two-dimensional group (97.06% vs 91.89%, continuous correction χ 2 =0.183, P =0.669). There were significant differences in the 1-, 2-, and 4-year cumulative tumor-free survival rates between the three-dimensional group and the two-dimensional group (90.8%/78.8%/72.8% vs 61.5%/55.9%/44.7%, χ 2 =5.073, P =0.024). The multivariate Cox regression analysis showed that preoperative planning method, complete or incomplete ablation, and alpha-fetoprotein at 1 month after surgery were independent influencing factors for the tumor-free survival of patients with liver cancer after radiofrequency ablation (all P < 0.05). Conclusion Radiofrequency ablation planning via the three-dimensional visualization ablation planning system can ensure the therapeutic effect of radiofrequency ablation, reduce the recurrence rate of liver cancer, and prolong the tumor-free survival of patients.
ABSTRACT
Abstract Oral cleft surgical repairs are performed using different techniques worldwide. Objective To evaluate and compare the development of the dental arches of children with unilateral cleft lip and palate before and after the primary surgeries performed with different techniques at the first months and six years of life. Methodology This is a retrospective longitudinal study. The sample comprised 56 dental casts divided int the following groups: Group 1 (G1) - cheiloplasty (Millard technique) at three months and one-step palatoplasty (von Langenbeck technique) at 12 months; and Group 2 (G2) - cheiloplasty (Millard technique) and two-step palatoplasty: anterior hard palate closure (Hans Pichler technique) at three months and posterior soft palate closure (Sommerlad technique) at 12 months. The digitized dental casts were evaluated at three months - pre-surgical (T1) and six years of life- post-surgical (T2). The following linear measurements were analyzed: intercanine (C-C'), intertuberosity (T-T') distances; anterior dental arch (I-CC'), anterior intersegment (I-C'), and total arch (I-TT') lengths. The palate area was also measured. Parametric and non-parametric tests were applied (p<0.05). Results In G1, the intragroup comparison showed statistically significant smaller I-CC' and I-C' at T2 (p=0.001 and p<0.001, respectively), while T-T', I-TT', and area comparisons were significantly greater (p<0.001, p=0.002, and p<0.001, respectively). In G2, the intragroup comparison exhibited statistically significant smaller C-C' and I-C' at T2 (p=0.004, for both), whereas T-T', I-TT' and area comparisons were significantly greater (p<0.001, p=0.004, and p<0.001, respectively). At T2, the intergroup analysis revealed that G1 had a statistically significant smaller I-CC' (p=0.014). The analysis of the intergroup differences (∆=T2-T1) showed that G1 had a statistically smaller I-CC' (p=0.043). Conclusion The two-step palatoplasty showed a more favorable prognosis for the maxillary growth than one-step palatoplasty in children with oral clefts.